Blog

Month: July 2019

DIY 2 Wire to 3 Wire LED Turn Signal Mod

The following modification will allow you to turn any ordinary 2 wire 12v LED low wattage light into a 3 wire hookup for use as a turn signal or brake light.  Most common use is for fender turn signal lights on a Jeep Wrangler. Parts and Tools List:  Wire Strippers Heat Shrink Tubing Lighter or Heat Gun Soldering Iron and Solder (1) 560 Ohm 1/2 Watt 5% Tolerance Resistor .
X
122127647835423